Pentair Pentek EP-10 Carbon Water Filter 10-Inch Under Sink Carbon Block Replacement Cartridge with Bonded Powdered Activated Carbon PAC Filter 10" x 2.5" 5 Micron
Pentair Pentek EP-10 Carbon Water Filter 10-Inch Under Sink Carbon Block Replacement Cartridge with Bonded Powdered Activated Carbon PAC Filter 10" x 2.5" 5 Micron
Pentair Pentek EP-10 Carbon Water Filter 10-Inch Under Sink Carbon Block Replacement Cartridge with Bonded Powdered Activated Carbon PAC Filter 10" x 2.5" 5 Micron
SKU: B0031O95KS
Availability: In Stock
$19.73 $48.76
Pentair Pentek EP-10 Carbon Water Filter 10-Inch Under Sink Carbon Block Replacement Cartridge with Bonded Powdered Activated Carbon PAC Filter 10" x 2.5" 5 Micron - B0031O95KS

This fits your .

  • Make sure this fits by entering your model number.

  • GREATER CHLORINE TASTE & ODOR REDUCTION than competitive 10 Micron carbon blocks

  • FITS ALL 10" standard housings and can replace any 10" x 2.5" carbon filter cartridge

  • HIGH POROSITY DESIGN helps prevent the cartridge from plugging before its adsorption capacity is exhausted

  • NSF INTERNATIONAL tested and certified for your peace of mind

  • 6,000 GALLON CAPACITY. Replace every 6 months or when you notice a drop in water pressure or water quality

    • This Pentek EP-10 carbon block filter cartridge reduces fine sediment and chlorine taste and odor in residential and commercial drinking water. It has a nominal (85%) filtration rating of 5 microns. The filter will reduce free available chlorine (FAC) at 2 parts per million (ppm) by at least 90% in up to 6,000 gallons at a flow rate of 1 gallon per minute (gpm). This cartridge is made of bonded powdered activated carbon (PAC) filter media wrapped in a polyolefin pre-filter with polyethylene outer netting. The nitrile butadiene rubber (Buna-N) gaskets seal the cartridge against the housing (sold separately). The cartridge has an initial pressure drop of 3.4 pounds per square inch (psi) at a flow rate of 1 gallon per minute (gpm), and operates over a temperature range of 40 to 180 degrees F (4.4 to 82.2 degrees C). This carbon block filter cartridge meets National Sanitation Foundation/American National Standards Institute (NSF/ANSI) standard 42 for quality assurance, and is used for purification of residential and commercial drinking water. The nominal filtration rating is for a particle removal efficiency of 85%. Chlorine reduction capacity is the minimum total amount of water for which the free available chlorine (FAC) at a concentration of 2 ppm is reduced by at least 90%. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others. Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.

    Related products